Skip to content
Kitchens, Cafes, Cellars

Urethane Cement That Takes the Steam in Los Altos Kitchens

A restaurant kitchen off State Street gets steamed and scrubbed every night, and a thin coating eventually gives up under that kind of heat. Urethane cement goes down thick, takes boiling water and hot oil without cracking, and handles a damp slab better than epoxy. Johnny Mendoza also lays it in homes, under catering kitchens and in wine rooms that need a floor built for work.

JP Resin Certified · Don Resin Certified · Based in Hollister, Working Los Altos

Johnny drives up from Hollister to walk the kitchen before service or after close.

Why kitchen floors crack from the heat

Most floor coatings and the slab beneath them expand and shrink at different rates. Pour boiling water across a cold floor, or open a freezer door onto a warm one, and that difference turns into stress right at the bond line. Do it every night for a couple of years and a thin epoxy starts to craze, then lifts at the drains and in front of the fryers.

Urethane cement handles that swing far better. It is troweled or slurried as a real layer, well past the build of any rolled coating, and it moves much more like the slab under it. Steam cleaning, a pot of stock dumped toward the drain, hot fryer oil on the floor: it takes all of it and stays bonded. Food acids, sugars and sanitizers do not bother it either.

Heat swings break kitchen floors. Foot traffic barely registers by comparison.

It also tolerates more moisture coming up through the slab than epoxy does, which matters in an older building where nobody can say whether a vapor barrier went in under the original pour.

The tradeoff is looks. Urethane cement is matte to textured and comes in a short list of colors. Johnny lays it where the floor has to work and suggests something else where it has to impress.

Kitchens Where it goes

Rooms that run hot and wet

Downtown restaurants and a few rooms in the house share the same problem: water, heat and a hard scrub at the end of the day.

Restaurant line

The cooks’ side of a Main Street restaurant, where fryers, steam kettles and the dish machine all live. A textured finish keeps footing through a wet shift, and the floor coves up the wall so the corner never holds water.

Cafe back room

Espresso machines, ice wells and a small dish pit, plus a morning crowd that starts early. Urethane cement goes down and returns to service quickly, which matters for a cafe that cannot afford to lose a whole week of mornings.

Catering kitchen

A second, working kitchen behind the main one, built for entertaining or for a caterer. It takes hot pans, sticky spills and a hose at the end of the night, so it gets a restaurant floor instead of tile with grout lines.

Wine room

A cellar or wine room stays cool and often damp, and spilled wine is acidic. Urethane cement handles both, and a coved base keeps mop water off the walls. It reads as a workroom floor, which suits a working cellar better than a gloss.

What a quarter inch of floor buys you

Thickness is the whole idea. A thin coating rides on the slab and depends on a bond a few mils deep, so heat and impact go straight to that bond. Urethane cement, laid that heavy, has real body. Once the slab is repaired, it covers old surface damage, and it shrugs off a dropped stock pot that would chip a thinner film.

At the walls, it turns up into a coved base, one curved piece running from the floor up the wall with no seam. That base is where tile kitchens give out first. Grout at the bottom of the wall breaks down, water gets behind it, and a smell follows that no amount of mopping fixes.

Drains are the other weak spot. Johnny cuts the new floor in tight to each drain body and seals the edge so dirty water cannot creep underneath. The walk-in threshold and the corner where the ice machine drips get the same treatment. On the first visit he walks the kitchen with a flashlight and marks every one of them, so none gets missed on install day.

Kitchen floors give out at the walls and drains. That is where the care goes.

Fitting the work around a restaurant’s week

Restaurants downtown rarely close for long, so the schedule starts with the days you already close. Urethane cement gets back into service quickly, and the work can often begin the night before a closed day. A bigger kitchen can be split into sections so part of the line keeps cooking while the rest cures, and Johnny lays out the order with your chef before anyone moves equipment.

He reads the slab before he settles on a system. Years of fryer oil soak into a bare floor and keep wicking back up, so those zones get stripped, ground and checked again until they come up clean. Moisture comes next. Urethane cement tolerates far more vapor from below than epoxy does, but there is still a limit, and the reading tells him which primer goes down.

At home the timing is easier. A catering kitchen, a wine room or a wash bay can be closed off for a few days while the floor cures, and there is no lunch rush waiting on it. The finish choices are short, a matte or a texture in a handful of colors, so that conversation is quick. For thickness, textures and coves in more depth, see our urethane cement page.

Kitchen floor questions from Los Altos owners

How long does a restaurant kitchen have to stay closed?

Usually only through the days you already close, sometimes starting the night before. Urethane cement returns to service quickly, and a big kitchen can be done in sections so part of the line keeps working. Johnny sets the schedule with you at the site assessment, built around the days you actually close.

Can it handle a steam cleaner every night?

Yes. Steam and boiling water are exactly what urethane cement is built for. It moves with the heat swing instead of cracking at the bond line the way a thin coating can. The texture you pick also affects how easily the steam lifts grime, so bring your cleaning routine to the walkthrough.

Why not just put down new quarry tile?

Tile can work, but its weak point is the grout. In a kitchen that gets hosed every night, grout lines wear, crack and hold grease, and the joint at the base of the wall fails first. Urethane cement has no grout lines at all, and its coved base carries the floor up the wall in one piece.

Is urethane cement right for a wine room at home?

It suits a working cellar well. It handles cool, damp air and acidic spills, and it tolerates moisture in the slab. It is matte and comes in few colors, so if the wine room doubles as a place to show off the collection, Johnny may point you toward a polished floor instead.

Will it make my house feel like a commercial kitchen?

In a catering kitchen or a wash bay, it will, and that is usually the idea. The finish is matte to textured in a short list of colors. It belongs in rooms where nobody is judging the floor and everyone is relying on it, with something prettier in the rooms guests actually see.

Can the floor go under a covered outdoor kitchen?

Under a roof, yes. A covered outdoor kitchen sees grease, hot pans and the hose at the end of a party, and urethane cement handles that well. A floor with no roof over it at all is a different question, and Johnny will walk you through what changes when the sun and rain hit it directly.

Walk the kitchen with Johnny

Send Johnny the size of the kitchen, which days you close and what your crew cleans with at night. He drives up from Hollister, reads the slab for moisture and old grease, and writes a price with prep, coves and finish on separate lines so you can see where the work goes.

Kitchen and cellar floors are in the gallery. You can also write out the job here and Johnny will reply.