Anti-Slip Coatings — Traction Where It Matters Most
Anti-slip coatings protect people, reduce liability, and meet OSHA and ADA requirements for slip resistance. From commercial kitchens and hospital corridors to pool decks and loading docks, Gold Coast Resin installs professional-grade non-slip surfaces that perform under the most demanding conditions.
JP Resin Certified·Don Resin Certified·160-Mile Radius
How Anti-Slip Coatings Work
Anti-slip coatings create controlled surface texture by embedding aggregate particles into a high-performance resin matrix. The aggregate protrudes slightly above the coating surface, creating microscopic contact points that dramatically increase the coefficient of friction between the floor and footwear. This engineered texture provides reliable traction even when the surface is contaminated with water, oil, grease, or chemical spills.
The aggregate options range from fine aluminum oxide for smooth-textured finishes in healthcare environments to coarse quartz and garnet for aggressive traction in heavy industrial settings. Each aggregate type creates a different balance between slip resistance and cleanability. Fine aggregates provide a surface that is easy to mop and sanitize while still meeting OSHA requirements, while coarser aggregates deliver maximum traction for outdoor environments and high-risk areas.
The resin system itself is equally important. Gold Coast Resin uses polyaspartic and epoxy base coats matched to the specific environment. Wet areas like commercial kitchens and pool decks require resin systems with superior water resistance and chemical tolerance. Industrial environments like loading docks and manufacturing floors need impact resistance and heavy abrasion tolerance in addition to slip resistance.
APPLICATIONS
Every environment has unique slip hazards. Gold Coast Resin tailors aggregate selection and coating systems to match the specific demands of each application.
Commercial Kitchens
Restaurant and institutional kitchens are constantly exposed to water, grease, and food debris. Our fine-aggregate anti-slip systems meet health department requirements while providing a surface that is easy to clean, sanitize, and maintain during daily operations. Seamless application eliminates grout lines where bacteria accumulate.
Pool Decks and Wet Areas
Pool surrounds, splash pads, and locker rooms need reliable traction on permanently wet surfaces. Our UV-stable anti-slip coatings resist chlorine, sunscreen chemicals, and constant water exposure without degrading. The textured surface stays comfortable barefoot while preventing dangerous slips on wet concrete.
Ramps and Slopes
ADA-compliant ramp coatings provide essential traction on inclined surfaces where standard flooring fails. Our aggressive-aggregate systems meet and exceed ADA slope requirements for wheelchair accessibility while providing pedestrian safety in all weather conditions including rain.
Healthcare Facilities
Hospital corridors, exam rooms, and entryways need anti-slip protection that also meets stringent hygiene standards. Our fine-texture systems are compatible with medical-grade cleaning chemicals and provide consistent traction for patients, staff, and wheeled equipment across the facility.
Loading Docks
Heavy foot traffic, forklift operations, and exposure to rain and snow make loading docks one of the highest-risk areas in any commercial facility. Our industrial-grade anti-slip coatings with coarse quartz aggregate withstand pallet jack abuse and provide reliable traction in all weather conditions.
Retail Entryways
Store entrances are liability hotspots where customers track in rain and mud. Decorative anti-slip coatings protect your business from slip-and-fall lawsuits while maintaining the visual appearance your brand requires. Available in custom colors that match your interior design scheme.
PROCESS
Every anti-slip installation begins with a slip resistance assessment and ends with verified compliance testing.
Site Assessment
Johnny evaluates your facility for slip hazards, existing surface conditions, traffic patterns, and contaminant types. This determines the optimal aggregate size, resin system, and coating thickness for your specific environment.
Surface Preparation
Diamond grinding removes existing coatings, contaminants, and surface irregularities. Proper mechanical preparation creates the concrete surface profile required for maximum adhesion of the anti-slip coating system.
Aggregate Broadcast
The base coat is applied and the selected anti-slip aggregate is broadcast into the wet resin at a calibrated density. Full broadcast ensures consistent traction across the entire surface with no thin spots or bare areas.
Seal and Verify
A clear seal coat locks in the aggregate while leaving the textured peaks exposed for traction. After curing, coefficient of friction testing confirms the floor meets or exceeds OSHA and ADA slip resistance standards.
ANTI-SLIP
Slip-and-fall accidents are the leading cause of workplace injury in the United States and the number one source of premises liability claims for commercial property owners. The financial consequences extend far beyond medical expenses to include workers compensation claims, OSHA fines, increased insurance premiums, and potential lawsuits that can threaten the survival of a business. Prevention through proper anti-slip floor coatings is dramatically less expensive than remediation after an incident.
Gold Coast Resin understands that anti-slip coating is not just about texture. The aggregate selection must match the specific contaminants present in your environment. A restaurant kitchen deals with grease and food oils, which require different aggregate geometry than a pool deck where the primary contaminant is plain water. Johnny evaluates your specific slip hazards before recommending a coating system rather than applying a one-size-fits-all product.
OSHA standards require that walking surfaces maintain a minimum static coefficient of friction of 0.5 for dry conditions and the ADA recommends 0.6 for level surfaces and 0.8 for ramps. Every anti-slip coating installed by Gold Coast Resin is tested after installation to verify compliance with these standards. This documentation protects your business in the event of a future claim and demonstrates due diligence to your insurance carrier.
Anti-slip coatings installed by Gold Coast Resin serve commercial properties across all of Central California, from restaurant kitchens in Hollister and Gilroy to pool decks in San Jose and hospital facilities in Monterey. The 160-mile service radius means one certified installer handles your project from assessment through verification. Call (650) 797-3040 for a free slip resistance assessment and learn how affordable proper floor safety can be.
Every installation includes a written certificate documenting the coating system, aggregate type, and measured coefficient of friction values. This documentation is invaluable for insurance purposes, OSHA compliance records, and building code inspections. Gold Coast Resin stands behind every anti-slip installation with a workmanship warranty that covers adhesion and aggregate retention for the rated lifespan of the coating system.
FAQ
YOUR BUSINESS
Every day without proper anti-slip protection is a day your business carries unnecessary risk. Call Johnny for a free slip resistance assessment today.
