Skip to content
Home Labs, Outbuildings

An ESD Floor for the Shop Out Past the Los Altos Hills House

On a property zoned at an acre or more, the room full of sensitive electronics is often not in the house at all. It is a detached shop with a soldering bench, a server room for a home business, or an equipment room down by the solar array. Most of those rooms never need a static control floor. When one does, Johnny Mendoza grounds it and meters it.

JP Resin Certified · Don Resin Certified · Based in Hollister, Working Los Altos Hills

Johnny comes up from Hollister and walks the outbuilding, the panel and the bench before pricing.

Most Hills estates will never need one

A static control floor exists to protect electronics that can be damaged by a discharge too small for you to feel. Factories and test labs lay them by the room. A house in Los Altos Hills almost never needs one, and for most benches a grounded mat and a wrist strap do the job.

Big lots change the picture a little. With room to build, people put real work in outbuildings: an electronics workshop where boards get assembled and repaired, a network room carrying a home business, a lab where someone tests prototypes on weekends. When several people walk around in that space all day, every step they take counts, including the ones that miss the mat.

When the gear in the room costs more than the floor, the floor is worth a conversation.

Johnny starts the site assessment by asking what is on the benches and racks, who works in the room and whether anyone hands you a spec. Remote work for a hardware company sometimes comes with one, and when it does, that number settles the floor. Without one, he works from what the equipment makers recommend.

If the answer is a single bench used a few evenings a month, he will say a mat is enough and leave it there. If the room is a real workspace, he builds the floor as one part of a grounded system and checks it with a meter before he leaves.

Spaces Out past the main house

Rooms on an estate that might qualify

These are the spaces where Johnny asks the most questions, because the answer changes from one property to the next.

Electronics workshop

A detached shop where boards get soldered, reworked and tested. This is the strongest case for a static dissipative floor, especially with more than one person at the benches. The floor ties into the building ground, and everyone working wears heel straps or ESD shoes.

Server and network room

Racks running around the clock for a home business or a heavily wired house. A person walking in to swap a drive carries charge across the room. Equipment has to come out while the floor goes down, so the network needs a plan for a day or two offline.

Home lab

A spare building used for prototypes, drones, audio gear or test equipment. Finished, cased products are far less fragile than bare boards, so Johnny asks what actually gets opened up on the bench. Sometimes the right answer is a static floor only under the work area.

Solar and battery room

Inverters and battery banks often live in an outbuilding. Whether that room needs a static control floor depends on the equipment maker and the installer, and many do not ask for one. Johnny reads their documents first and follows them, whatever they call for.

Tracing ground in a detached building

Every static control floor ends at a ground point. In a factory that point is easy to find. In a shop or barn well away from the house, the wiring may be newer than the house or much older, fed from its own subpanel, and nobody remembers who ran it. Johnny wants a licensed electrician to confirm a solid building ground before any copper goes down. If it turns out to be missing or weak, the electrician fixes that first.

The floor itself goes down in layers. The slab is ground and repaired, then primed. Copper strips are laid out and tied to that ground point. A conductive primer bridges every part of the floor back to the copper, and the body coat on top, epoxy or urethane carrying conductive fibers or fillers, does the work underfoot.

Two ranges exist. Dissipative floors, somewhere between a million and a billion ohms, bleed charge off slowly and suit most benches. Conductive floors, from tens of thousands of ohms up to about a million, move it faster, for very sensitive parts or a spec that demands it. Once the floor cures, Johnny takes resistance readings across the room, near the benches and at the far corners, and checks them against your spec or the equipment maker’s numbers.

Find the ground first. The coating comes second.

Keeping an outbuilding floor on spec

A static floor protects nothing if the person on it is insulated. Ordinary rubber soles hold the charge in, so the people who work in the room wear ESD shoes or heel straps that touch skin and floor. Benches and carts need their own ground. Johnny walks you through where each strap and cord should connect before he packs up.

Outbuildings collect what gets tracked in from the property. Dust off the riding pathways and gravel from the drive end up on the floor, and the urge to scrub it hard with something strong is where floors quietly stop working. Wax or a cleaner that leaves a film can insulate the surface so it looks fine and reads wrong. A damp mop with a neutral cleaner is the daily answer.

Keep a meter on hand, or ask Johnny back for a set of readings once a year, so you know the floor still drains charge. Readings taken at the same spots each time make any drift easy to spot. A reading that has crept up usually points to a cleaning product, and a proper scrub with the right cleaner often brings it back. Systems, ranges and testing are laid out in more detail on our ESD flooring page.

Static control questions from the Hills

Our solar batteries live in the barn. Does that room need an ESD floor?

Not automatically. Some battery and inverter makers say nothing about static floors, and others give specific requirements for the room. Johnny reads the installer’s documents and the maker’s notes before recommending anything, and he follows them. If they ask for no special floor, the room keeps the one it has.

The shop runs off its own subpanel. Is that a good enough ground?

It can be, if it was wired and bonded properly. Johnny cannot judge that by looking, so he asks a licensed electrician to confirm the ground point the copper strips will tie into. If anything is off, the electrician sorts it out before the floor goes in, because the whole system depends on that one connection.

Does a dry summer change how the floor works?

The floor keeps draining charge whatever the weather. What changes is how much charge people build up, which climbs in dry air, so a weak spot in the system shows up faster then. That is a good season to take a few readings and make sure every strap and cord is still connected.

Will a heavy UPS or rolling racks wear through the floor?

The body coat is a hard, built-up layer, and rolling a rack across it on proper casters is normal use. Point loads from heavy units are a different matter, so Johnny asks about weights and feet on the walk. Wide pads under the heaviest pieces spread the load, and dragging anything across the floor is the real enemy.

Can half the outbuilding stay an ordinary garage?

Yes. The static floor can stop at a clean line, with the copper and conductive layers kept inside the work area. The garage side can get a flake floor that handles tires and tools. The two finishes meet at a crisp edge, and you can usually tell them apart by color so nobody forgets where the grounded zone ends.

Will we see the copper strips once the floor is done?

No. The strips sit under the conductive primer and the body coat, so the finished floor reads as one even surface. Their layout follows the coating maker’s instructions. Ask Johnny to mark where they run and where they tie to ground, a sketch worth keeping for whoever works on the building later.

Show Johnny the room and the gear in it

Send Johnny a short list of what sits on the benches and racks, how many people work in the room and any spec you have been handed. A photo of the subpanel helps too. He comes up from Hollister, walks the building and the route to it, and writes a price with grounding, prep and finish on separate lines.

Finished Gold Coast floors are in the gallery. Rather type it out? Send the room details and Johnny will get back to you.